Skip to Content
Standard
Sort By: Name (A-Z)
T1.R100-8DI powerIO-Rio 8DI
Digital input module for the connection of messages (24V)
- 8x digital inputs with counting function
- Power supply 24V AC/DC
Connection via Modbus RTU.
176.13 € 176.13 EUR
T1.R100-UX.24
8 universelle IOs
2 DO-R
Spannungsversorgung 24V UC
323.75 € 323.75 EUR
T1.R310 powerIO-HK-Verteiler
Suitable for thermal actuators and installation in underfloor heating circuit distributors
• Modbus
• 230V power supply
• 12x DO 24V
• 2x AI (0–10V or PT1000)
• 2x DI
• Enclosure 326.5 x 90 x 52 mm
• Wall mounting / DIN rail
Magnetic mounting optional
395.00 € 395.0 EUR
T1.R310-RH Rail Holder Set
DIN rail holders for powerIO® HK Distributor T1.R310
(Set / 2 pieces)
6.50 € 6.5 EUR
T1.R350 powerIO-Booster
For power amplification on 24V side
Input U=230V AC
Output U=24V DC, I=2A
2 pcs. M12 connectors with 24V DC outputs each and Modbus RTU.

215.00 € 215.0 EUR
T1.S110 powerIO-Start Unit
Switch, allows to connect up to 3x powerIO®-Lines and 2x RJ45 Ethernet cables for example controller, touch panel or network.
286.42 € 286.42 EUR
T1.SPD1 powerIO-Surge Protection Device
Surge protection for powerIO-Line
Preassembled 230V and Ethernet surge protection device. 2x cable entry (incoming/outgoing).
Savings on lightning protection
Complete ventilation unit on the roof via a single box
Enclosure 182 x 180 x 111 mm, IP67


535.00 € 535.0 EUR
T1.Y100 powerIO-Y
2x Cable gland

27.54 € 27.54 EUR
T1.Y200 powerIO-Y
Cable gland, 1 x M12 socket

42.96 € 42.96 EUR
T1.Y300 powerIO-Y
2 x M12 socket

58.38 € 58.38 EUR
T1.Z100 Shield clamp
For shield connection of the powerIO®-Line to the powerIO®-Box. Included in the scope of delivery of the powerIO®-Box.

7.71 € 7.71 EUR
T1.Z101 powerIO Ethernet connetor blue
Ethernet connector for the powerIO®-Line on the powerIO®-Box or powerIO®-Start Unit. The Ethernet connectors are included in the scope of delivery of the powerIO®-Box.

10.40 € 10.4 EUR
T1.Z102 RJ45 plug <-> M12 D-coded 4-pin plug
RJ45 plug <-> M12 D-coded 4-pin plug Ethernet cable for direct connection to powerIO® expansion board "Ethernet“.

79.32 € 79.32 EUR
T1.Z104 M12 A-coded 5-pin plug <-> open end - 2m
Standard installation cable for connecting sensors/actuators to the powerIO®-Box.
5 x 0.25 mm² shielded.
17.60 € 17.6 EUR
T1.Z105 M12 A-coded 5-pin plug <-> open end - 5 m

Standard installation cable for connecting sensors/actuators to the powerIO®-Box.
5 x 0.25 mm² shielded.
20.35 € 20.35 EUR
T1.Z106 M12 A-coded 5-pin plug <-> open end - 10 m
Standard installation cable for connecting sensors/actuators to the powerIO®-Box.
5 x 0.25 mm² shielded.

27.50 € 27.5 EUR
T1.Z107 M12 A-coded 5-pin plug <-> M12 A-coded 5-pin socket - 2 m
Standard installation cable for connecting sensors/actuators to the powerIO®-Box.
5 x 0.25 mm² shielded - cable length 2 m

34.10 € 34.1 EUR
T1.Z108 M12 A-coded 5-pin plug <-> M12 A-coded 5-pin socket - 5 m
M12 A-coded 5-pin plug <-> M12 A-coded 5-pin socket
Standard installation cable for connecting sensors/actuators to the powerIO®-Box.
5 x 0.25 mm² shielded - cable length 5 m

38.50 € 38.5 EUR
T1.Z109 Installation line
Installation line by the meter.
5 x 0.25 mm² shielded. Corresponds to the same cable type/color code as M12 cable. Minimum order quantity 10m.
2.31 € 2.31 EUR
T1.Z110 M12 A-coded 5-pin Y-adapter
M12 5-pin A-coded socket/plug to plug
44.06 € 44.06 EUR