Zubehör

USB 2.0 to RJ45 adapter 10/100 Mbps for H1.M100 IoT gateway and CODESYS controller.
Used to add a second LAN port to the controller – this is automatically detected and can be configured via the H1.M100 web interface.

M-Bus to Modbus TCP Gateway
Integration of up to 20 M-Bus consumption meters into building management systems or a PLC with Modbus TCP (Ethernet).
Enclosure 35 x 90 x 59 mm (2 HP), DIN rail

For shield connection of the powerIO®-Line to the powerIO®-Box. Included in the scope of delivery of the powerIO®-Box.

Ethernet connector for the powerIO®-Line on the powerIO®-Box or powerIO®-Start Unit. The Ethernet connectors are included in the scope of delivery of the powerIO®-Box.

M12 5-pin A-coded socket/plug to plug

For self-assembly.

For self-assembly

For self-assembly.

For self-assembly.

Protection cap for unused M12 sockets

Allows a powerIO® box to serve as a bridge, enabling continued Ethernet communication in the network.

Installation plate for the T1 series. Allows easy preassembly for electrical installation. 4 threaded bolts for subsequent screwing on of the powerIO®-Box. With cut-out for mounting on pipes using lashing straps.

Plug <-> 2x socket
M12 A-coded 5-pole

Allows two M12 plugs to be connected to one socket. Bus and voltage bridged. Can be plugged directly into the powerIO box to connect two sensors/actuators.

4-pin for patch cables
CAT Tool-free assembly (Insulation displacement connection / 0.14–0.25 mm²)

Installation plate for the T1 series. Allows easy preassembly for electrical installation. 4 threaded bolts for subsequent screwing on of the powerIO®-Box. With cut-out for mounting on pipes using lashing straps.
With premounted magnets for mounting for example on ventilation ducts.