powerIO System

Decentralized automation box.
230V power supply, ethernet communication, gateway function
2 x 230V outputs up to 6A
4 x M12 coupling A-coded for RS485 Connections incl. 24V/2A DC
Power supply (Port 1 to 4)
1 x optional slot (Port5)
1 x M12 service interface for commissioning with the App
Incl. shield clamp, ethernet, microfuse (A)

CODESYS license dongle with USB adapter for installation in the decentralized automation box T1.B100, including pre-installed CODESYS Multicore Runtime license.
For installation, the additional protective cover must be removed. Installation instructions are included.
Includes sticker "CODESYS License-Dongle inside" for placing on the powerIO box.

M-Bus to Modbus TCP Gateway
Integration of up to 20 M-Bus consumption meters into building management systems or a PLC with Modbus TCP (Ethernet).
Enclosure 35 x 90 x 59 mm (2 HP), DIN rail

Distributor for hybrid line powerIO-Line.
Input terminals for power and Ethernet CAT6 hybrid cable with shield clamps
Output terminals for 2 pcs. Power and Ethernet CAT 6
Hybrid cable with shield clamps
HUB functionality for Ethernet CAT6 distribution via connection to expansion board "Ethernet" at powerIO® box. Can also be used to extend the powerIO®-Line.

Hybrid cable for connecting the powerIO®-Boxes.
Power: 3 x 4.00 mm²
Data: 2 x (2 x 0.34 mm²), shielded
Available by the meter, minimum order quantity 20 m

Hybrid cable for connecting the powerIO®-Boxes.
Power: 3 x 2.50 mm²
Data: 2 x (2 x 0.34 mm²), shielded
Available by the meter, minimum order quantity 20 m

Suitable for thermal actuators and installation in underfloor heating circuit distributors
• Modbus
• 230V power supply
• 12x DO 24V
• 2x AI (0–10V or PT1000)
• 2x DI
• Enclosure 326.5 x 90 x 52 mm
• Wall mounting / DIN rail
Magnetic mounting optional

For power amplification on 24V side
Input U=230V AC
Output U=24V DC, I=2A
2 pcs. M12 connectors with 24V DC outputs each and Modbus RTU.

Switch, allows to connect up to 3x powerIO®-Lines and 2x RJ45 Ethernet cables for example controller, touch panel or network.

Surge protection for powerIO-Line
Preassembled 230V and Ethernet surge protection device. 2x cable entry (incoming/outgoing).
Savings on lightning protection
Complete ventilation unit on the roof via a single box
Enclosure 182 x 180 x 111 mm, IP67

This starter set consists of:
1 x powerIO® box (T1.B100)
1 x Start Unit (T1.S100)
20m powerIO®-Line (T1.L100)
5m installation cable (T1.Z109)
1 x M12 cable 2m (T1.Z104)
1 x M12 cable 5m (T1.Z105)
1 x M12 cable 10m (T1.Z106)
1 x M12 cable 2m (T1.Z107)
1 x M12 flange plug (T1.Z114)
1 x powerIO®-Y distributor (T1.Y200)
1 x powerIO® WiFi Dongle (T1.D200)

* Purchase of the starter set only once per customer possible. Product not discountable.